Three Lennox iComfort Thermostat Error Codes And Their Meaning
When something’s messing with your HVAC system, one of the first places to look is your thermostat. Many models use a digital display that will reveal a specific numerical error code. This error code can be used to help diagnose the problem and speed up the troubleshooting and repair process for HVAC systems like your furnace.
This is even easier with smart thermostats like the Lennox iComfort model. Let’s compare three serious error codes—411, 225 and 31—to learn what the problem is. We’ll also cover what steps your technician will take to fix the problem, and the possible costs to do so.
Solved: iComfort Error Code 411
Error code 411 is an urgent priority to resolve. You’ll see this error code appear when the outdoor unit’s low-pressure switch malfunctions five times or more throughout one heating or cooling cycle. Since this error code involves the outdoor unit, it can be involved with your air conditioner. Every time the low-pressure switch opens incorrectly, the error count increases. Once it reaches five strikes, the thermostat automatically shuts down the outdoor unit. This is known as a lockout and is a safety feature intended to minimize damage.
- Fixing the Problem: A technician will check the system charge using several methods, as the issue could be with the switch’s power connections rather than the low-pressure switch itself. Once the cause has been uncovered, technicians will reset the outdoor unit by putting it in test mode or by resetting low-voltage power. Once the issue is taken care of, the error code should automatically disappear.
- Estimated Repair Cost: Swapping out a low-pressure shutoff switch can depend on the specific model of your outdoor unit. You could expect to pay between $200 to more than $600 depending on parts and air conditioning repair costs. The shutoff switch itself costs an average of $30 to $150.
Clearing Error Code 225
Error code 225 is specific to your furnace, namely the high-pressure switch. This switch is a safety component that releases high pressure inside the furnace, such as when airflow is obstructed. When this error code shows up, it means the pressure switch can’t close. Without steady airflow and pressure, the furnace won’t run as efficiently.
- Fixing the Problem: The technician will monitor the high-pressure switch to evaluate how it functions. They’ll measure the pressure while it attempts to close during a heating cycle as well as its general operating pressure. If they recognize a problem, an obstruction stopping airflow is the most likely culprit. There are several places to look, such as the vent and combustion air inducer. Technicians will inspect both these components as well as the condensate drain to locate the blockage.
- Estimated Repair Cost: Because there are several places to look before an obstruction can be found, labor costs should be considered when taking care of error code 225. Ultimately, the total cost of this furnace repair will depend on where the problem is found as well as how long it takes the technician to determine the source.
Solving Error Code 31
Seeing error code 31 on your thermostat means it hasn’t been able to communicate with your furnace for more than three minutes. Several components communicate with the thermostat, so you can find this error code when any of them malfunction or fail. Most of the time this can be traced back to an electrical problem, like bad wiring or a loose connection.
- Fixing the Problem: A technician can take a look at all the connections and wiring of the communicating components of your furnace. They should test voltages and wiring ohms since particularly high resistance can lead to a disconnection. With a special tool called a multimeter, technicians can find out where the disruption originated from. Sometimes this is the furnace’s float switch, a component that shuts down the furnace when the condensate drain pan is overflowing.
- Estimated Repair Cost: With several potential causes, it may be difficult to gauge the total repair costs of error code 31. Technicians will inspect the float switch to rule it out before thoroughly reviewing electrical wiring and connections. If the cause is damage or a failed component, replacement part costs should be included. You might expect to spend anywhere from $200 to more than $800 for higher-range models.
